2.4 GHz Antennas (Bluetooth, ZigBee, WiFi)

GLYN Antennas

Image Part Number Description Datasheet
AGS069

AGS069

2.4 GHz magnetic mount antenna

AGS069 has a 2dBi gain and IP67 waterproof housing. AGS069 with cable lengths of 1 metre and 3 metres and with SMA male connector are available in stock.

Various options are available for connectors (SMA, MMCX, MCX, others) and RG174 cable length (3m, 5m, others).

Download PDF
GL8/25-9

GL8/25-9

High Gain 2.4GHz Yagi Antenna

GL8/25-9 is a 2.4GHz as well as a penta band 3G/GSM yagi antenna with a 9dBi gain (806-2500MHz). GL8/25-9 with 5 or 10 metre low loss LMR200 coaxial cable and SMA male connector are available in stock.

Various options are available for connectors (SMA, FME, MMCX, MCX, others) and cable length.

Download PDF

 

Connector and Cable Length Options:

* Please fill out our Contact Form to determine stocked options. Non-stocked options (e.g. different connector or cable length) has MOQ of 50pcs.

 

EAD (Embedded Antenna Design Ltd)

EAD is an innovative and creative company with headquarters in the UK and specialising in the design and supply of multiband antenna solutions for telemetry and telematics applications. Their experience covers a wide range of antenna products from miniature handset antennas to wireless access point antennas and a variety of solutions in between.

Image Part Number Description Datasheet
Acara

Acara

Internal 2.4 GHz antenna

The Acara is a internal PCB antenna covering the 2.4 frequency band.

It is a ground plane independent design suitable for either mobile or fixed applications.

The antenna is available in stock in various cable and connector configurations.

Check datasheet or table below for various part number ordering options.

Download PDF
Rhea

Rhea

Internal 2.4/5.8 GHz antenna

The Rhea is a groundplane independent dual band 2.4/5.8 GHz internal antenna and is supplied with various cable and connector options. Enabling connectivity to both 2.4 and 5.8 GHz wireless LAN bands, the Rhea is a compact solution for internal antenna applications. This antenna is available in stock.

Check datasheet or table below for various part number ordering options.

Download PDF
BT-Stubby

BT-Stubby

2.4 GHz stubby antenna
(recommended for Bluegiga WT11-E module)

The BT-Stubby is a 2.4 GHz stubby antenna design for wireless device applications including portable and fixed units.

It is a cost-effective 2.4 GHz solution and comes with a SMA-Male connector.

The BT-Stubby is available in straight or right-angle versions. A straight version with RP-SMA connector is a also available.

Check datasheet or table below for various part number ordering options.

Download PDF
BT-ComPact

BT-ComPact

Compact 2.4 GHz helical stub antenna

The BT-ComPact is a compact 2.4 GHz Helical antenna with either a SMA-Male or a MMCX Straight connector.

Designed for mating to MMCX receptacles on the PCB boards, the MMCX version lends itself well to fixed 2.4 GHz deployments such as Zigbee applications. The SMA-Male version is designed for terminals where antenna should be externally mounted onto a SMA-Female connector.

Check datasheet or table below for various part number ordering options.

Download PDF
BKR2400

BKR2400

2.4 GHz 1/2 wave knuckle antenna
(recommended for Bluegiga WT11-E module)

The BKR2400 is a 1/2 wave dipole with a SMA-Male knuckle operating at 2.4 GHz. This is an ideal product for WLAN, Zigbee and Bluetooth applications where a groundplane or a proximity groundplane is not available. The BKR2400 is often used on WLAN terminals, routers and access points and offers 2 dBi of gain. Also available for Wi-Fi equipment: BKR2400 with RP-SMA connector (part number: FBKR35068-RS-KR)

Check datasheet or table below for various part number ordering options.

Download PDF
BT-Blade

BT-Blade

2.4 GHz waterproof blade antenna
(recommended for Bluegiga WT11-E module)

The BT-Blade is a waterproof blade antenna covering the 2.4 GHz frequency band. It is a ground plane independent design and has a waterproof cover to make the antenna more durable. This makes it ideal for discrete fixed or mobile applications.

The antenna is available in various cable and connector configurations.

Check datasheet or table below for various part number ordering options.

Download PDF
C-Blade

C-Blade

2.4 GHz fixed mount blade antenna

The C-Blade is a cost-effective, fixed mount 2.4 GHz antenna designed to support WLAN and Bluetooth applications. It is a similar design to the popular BT-Blade antenna, but has a mounting tab for flexible mount options. The C-Blade can also be supplied in a white finish for applications requiring a cost-effective 2.4 GHz ceiling-mount antenna. The C-Blade is a groundplane independent, omni-directional antenna offering good gain and efficiency.

The C-Blade comes in various cable/connector configurations.

Check datasheet or table below for various part number ordering options.

Download PDF
CPW

CPW

2.4/5 GHz high gain puck antenna

The CPW is a tough and durable 2.4 and 4.9-6.0 GHz puck antenna with approx 3 dBi gain. The antenna is a screw-mount antenna requiring a 20mm drill hole. The cable exit is on the underside of the antenna and once mounted is totally enclosed, secure and waterproof. The antenna is secured in place by a nut that is tightened from underneath. The CPW is ideal for Wireless LAN and Zigbee applications where a discrete antenna is required, but performance cannot be compromised. A cellular version (CPT) and GSM (CPO) version of this antenna are also available.

Check datasheet or table below for various part number ordering options.

Download PDF
Z-Top

Z-Top

Very low profile external 2.4 GHz antenna

The Z-Top is a very low profile 2.4 GHz external antenna with an SMA-Female BLK connector underneath. It measures approximately 80mm in diameter and approx 13mm in height, offers an omni-directional radiation pattern and 1 dBi gain. The Z-Top is ideal for telemetry, monitoring and M2M deployments such as datalogging, vending, gaming, kiosks where an external antenna should attract as little attention as possible or where the antenna is deployed marginally above the eye-line. The Z-Top is available in a black or white radome.

Check datasheet or table below for various part number ordering options.

Download PDF
BUF2400

BUF2400

2.4 GHz dipole antenna with flying lead

The BUF2400 is a ½ wave dipole for fixed and portable wireless devices. Supporting the 2.4 GHz frequency, the BUF2400 is mounted using a captive part and connected to the radio using a U.FL connector. Ideal for applications where an external bulkhead connector is not required, the BUF2400 provides a neat WLAN and Bluetooth antenna solution.

Check datasheet or table below for various part number ordering options.

Download PDF

 

EAD Antenna Ordering Options

Part Number Ordering Option Description
Acara FAC35010-MR-16 Acara with 160mm RG-178 and MMCX Connector
Acara FAC35010-UF-10 Acara with 100mm cable and U.FL Connector
Rhea FRHE35121-MR-16 Rhea with 160mm RG-178 and MMCX Connector
Rhea FRHE35121-UF-10 Rhea with 100mm cable and U.FL Connector
BT-Stubby FBTS35024-SM-RA BT-Stubby with SMA-Male RA Connector
BT-Stubby FBTS35024-RS-ST BT-Stubby with RP-SMA ST Connector
BT-Stubby FBTS35024-SM-ST BT-Stubby with SMA-Male ST Connector
BT-Compact FBMS35152-SM-ST BT-Compact with SMA-Male ST Connector
BT-Compact FBMS35152-MS-ST BT-ComPact with MMX-Male ST Connector
BKR2400 FBKR35068-SM-KR BKR2400 with SMA-Male Connector
BKR2400 FBKR35068-RS-KR BKR2400 with RP-SMA Connector
BT-Blade FBT35009-MR-1K BT-Blade with 1M RG-174 and MMCX RA Connector
BT-Blade FBT35009-SM-1K BT-Blade with 1M RG-174 and SMA-Male Connector
C-Blade FCB35037-MR-2K C-Blade with 2M RG-174 and MMCX RA Connector
C-Blade FCB35037-SM-2K C-Blade with 2M RG-174 and SMA-Male Connector
CPW FCPW35168-SM-1K CPW with 1M RG-174 and SMA-Male
CPW FCPW35168-SM-2K CPW with 2M RG-174 and SMA-Male
CPW FCPW35168-SM-3K CPW with 3M RG-174 and SMA-Male
Z-Top FZTP35095-SFP-XX-W Z-Top with White Radome
Z-Top FZTP35095-SFP-XX-B Z-Top with Black Radome
BUF2400 FBUF35120-UF-15 BUF2400 with 150mm cable and U.FL connector