Active GPS Antennas

GLYN Antennas

Image Part Number Description Datasheet
AGG000D

AGG000D

Magnetic mount active GPS antenna

AGG000D is a cost-effective magnetic-mount active GPS antenna with 28dB LNA gain and 1.5dB noise figure. It is supplied with 3 metre RG174 cable, SMA male connector and IP67 rated waterproof housing (43 x 33 x 14mm). We also stock this antenna with MMCX right angle male and MCX straight male connectors.

Various options are available for connectors (SMA, MMCX, MCX, others) and RG174 cable length (3m, 5m, others).

Download PDF
AGG000F

AGG000F

Screw mount active GPS antenna

AGG000F is a cost-effective magnetic-mount active GPS antenna with 28dB LNA gain and 1.5dB noise figure. It is supplied with 3 metre RG174 cable, SMA male connector and IP67 rated waterproof housing - 46mm (D) x 15mm (H).

Various options are available for connectors (SMA, MMCX, MCX, others) and RG174 cable length (3m, 5m, others).

Download PDF
AGG000H

AGG000H

Magnetic mount active GPS antenna

AGG000H is a cost-effective magnetic-mount active GPS antenna with 28dB LNA gain and 1.5dB noise figure. It is supplied with 3 metre RG174 cable, SMA male connector and IP67 rated waterproof housing (39 x 33 x 14mm).

Various options are available for connectors (SMA, MMCX, MCX, others) and RG174 cable length (3m, 5m, others).

Download PDF
AGG005

AGG005

Marine active navigation GPS antenna

The AGG005 is an active navigation GPS antenna suitable for marine applications.

The AGG005 antenna has a dimension of 94mm (diameter) x 135m (height). It has an LNA gain of 28/38/52dB, noise figure of 1.5dB and DC voltage of 2.2 to 5V. It comes with 8-30 metre RG58 cable.

Download PDF
AGG044

AGG044

Surface-mount high-gain GPS antenna

The AGG044 surface-mount high-gain GPS antenna is the smallest active quadrifilar helix antenna available, providing high performance in difficult GPS applications.

The AGG044 antenna is balanced, which isolates it from the device and enables the antenna to reject common mode noise resident on the device ground plane. It may be deployed in an external, “stubstyle” configuration, but it is also a simple antenna to embed due to its isolation properties. The antenna is deployed with either a black radome or an ABS plastic sleeve.

Download PDF
AGG000N

AGG000N

Internal active GPS antenna

The AGG000N is an internal active GPS antenna with LNA gain of 28dB (typical), 1.5dB noise figure and 27 x 27 x 9mm dimension.

Various options are available for connectors (SMA, MMCX, MCX, others) and RG174 cable length (3m, 5m, others).

We are stocking this model with MMCX connector.

Download PDF
AGG055

AGG055

Internal active GPS antenna

The AGG055 is an internal active GPS antenna with LNA gain of 10-30dB (typical), 1.5dB noise figure and 13 x 13 x 6.5mm dimension.

Various options are available for connectors (SMA, MMCX, MCX, others) and RG174 cable length (3m, 5m, others).

We are stocking this model with UFL and MMCX connectors.

Download PDF

 

Connector and Cable Length Options:

* Please fill out our Contact Form to determine stocked options. Non-stocked options (e.g. different connector or cable length) has MOQ of 50pcs.

 

EAD (Embedded Antenna Design Ltd)

EAD is an innovative and creative company with headquarters in the UK and specialising in the design and supply of multiband antenna solutions for telemetry and telematics applications. Their experience covers a wide range of antenna products from miniature handset antennas to wireless access point antennas and a variety of solutions in between.

Image Part Number Description Datasheet
GPS450

GPS-Stubby

Stubby active GPS antenna

The GPS-Stubby antenna is an active GPS stubby antenna supplied in a robust sheath and terminated in either a SMA-Male Straight or SMA-Male Right Angle connector. Designed for applications where an internal GPS antenna is unsuitable and where a standard patch antenna with cable is not practical, the GPS-Stubby offers a compact and cost-effective stubby antenna solution.

 With an integrated LNA, the effective gain of the GPS-Stubby is 26 dB. The GPS-Subby is housed in compact dimensions of 67x18.5mm (dxh).

Check datasheet or table below for various part number ordering options.

Download PDF
GPS450

GPS450

Window mount active GPS antenna

The GPS450 is a cost-effective adhesive window-mount active GPS antenna. It is designed for fleet management and asset tracking applications. It is supplied with 3M RG-174 and SMA-Male connector.

The GPS450 has dimensions of 45x45x14.5mm and has a LNA gain of 25 dB.

Check datasheet or table below for various part number ordering options.

Download PDF
GPS460

GPS460

Magnetic mount active GPS antenna

The GPS460 is a cost-effective magnetic-mount active GPS antenna. It is designed for fleet management and asset tracking applications. It is supplied with 3M RG-174 and SMA-Male connector.

The GPS460 has dimensions of 45x45x14.6mm and has a LNA gain of 25 dB.

Check datasheet or table below for various part number ordering options.

Download PDF
GPS490

GPS490

Roof mount active GPS antenna

The GPS490 is an roof-mount (screw-mount) active GPS antenna. It is designed for fleet management and asset tracking applications where permanent mounting is required. It is supplied with 3M RG-174 and SMA-Male connector.

The GPS490 has dimensions of 60.4x50.4x18.5mm and has a LNA gain of 25 dB.

Check datasheet or table below for various part number ordering options.

Download PDF
GPS3615

GPS3615

Compact active GPS patch antenna

The GPS3615 is a compact internal active GPS antenna element designed to be integrated into mobile devices. The GPS3615 is primarily designed for portable tracking devices and compact terminals requiring GPS functionality.

The GPS3615 has dimensions of 20x20x6mm and a LNA gain figure of 15 dB. The GPS3615 is available with a U.FL or MMCX RA cable/connector configuration. A 20 dB gain version called the GPS3620 is also available. 

Check datasheet or table below for various part number ordering options.

Download PDF
GPS3620

GPS3620

Compact active GPS patch antenna

The GPS3620 is a compact internal active GPS antenna element designed to be integrated into mobile devices. The GPS3620 is primarily designed for portable tracking devices and compact terminals requiring GPS functionality.

The GPS3620 has dimensions of 20x20x6mm and a LNA gain figure of 20 dB. The GPS3620 is available with a U.FL compatible or MMCX RA cable/connector configuration.A 15 dB gain version called the GPS3615 is also available.

Check datasheet or table below for various part number ordering options.

Download PDF
GPS5100

GPS5100

Active GPS patch antenna

The GPS5100 is an internal active GPS antenna element designed to be integrated into mobile devices. Ideal for location and tracking unit applications, the GPS5100 is a cost-effective way to design-in GPS functionality.

The GPS5100 has dimensions of 30x27m and a LNA gain figure of 26 dB.

The GPS5100 is available with various cable/connector configurations.

Check datasheet or table below for various part number ordering options.

Download PDF

 

EAD Antenna Ordering Options

Part Number Ordering Option Description
GPS-Stubby FGPS35216-SM-ST GPS-Stubby Antenna with SMA-Male ST
GPS-Stubby FGPS35216-SM-RA GPS-Stubby Antenna with SMA-Male RA
GPS450 FGPX35135-SM-3K GPS 450 with 3M RG-174 and SMA-Male
GPS460 FGPX35136-SM-3K GPS460 with 3M RG-174 and SMA-Male
GPS490 FGPX35137-SM-3K GPS490 with 3M RG-174 and SMA-Male
GPS3615 FGPS35180-MR-10 GPS3615 with 100mm cable and MMCX RA Connector
GPS3615 FGPS35180-IPX-10 GPS3615 with 100mm cable and IPX Connector
GPS3620 FGPS35181-MR-10 GPS3620 with 100mm cable and MMCX RA Connector
GPS3620 FGPS35181-IPX-10 GPS3620 with 100mm cable and IPX Connector
GPS4100 FGPS35064-MR-10 GPS4100 with 100mm cable and MMCX RA Connector
GPS5100 FGPS35065-MR-10 GPS5100 with 100mm cable and MMCX RA Connector